Why choose Code 6 210mm 6m Roofing Lead?

Code 6 210mm 6m Roofing Lead is a narrow roll in a heavier gauge, designed for flashings and trims where you want extra stiffness,
durability and a tidy finish. At approximately 2.65 mm thick and around 30.0 kg/m², Code 6 resists
deformation in exposed locations and holds a clean line once dressed. The 6 m length reduces joints compared with 3 m rolls,
improving presentation and productivity where safe handling is planned. For principle-led refreshers on movement control, laps and detailing, browse
The Lead Lads and our standards explainer:
BS 6915 — Proper Leadwork.

Best-fit uses

• Narrow abutment flashings to brick/stone where robustness matters.
• Small trims & protective weatherings at eaves/verges and upstands.
• Chimney details (small aprons/soakers/step flashing zones, where width is constrained).
• Refurbishment upgrades where lighter codes have failed or feel flimsy in exposure.
• Repairs requiring a stiff sheet that will hold a crisp arris once dressed.

Good practice (movement & fixings)

Keep fixings out of movement zones and never bridge expansion joints. Where a slip layer is appropriate, use
Building Paper Lead Underlay beneath wider weatherings to reduce underside abrasion and allow free movement.
For chase restraint on flashings use Hall Clips, then point neatly with mortar or
Lead Mate Sealant. Finish visible work with
Patination Oil to minimise early staining while the natural patina develops.

Planning & set-out

Confirm lap requirements, chase depth and joint positions before cutting Code 6 210mm 6m Roofing Lead. Use sensible piece lengths
and align joints with drips/outlets where relevant. For real-world leadwork examples and detailing quality, review
Neal Roofing — Leadwork.

Complete the system

Pair this roll with:
Copper ARS Nails or
Stainless Ringshank Nails,
Hall Clips for chase restraint,
Lead Mate for sealing, and
Patination Oil for clean presentation.

Note: Figures are indicative. Always follow your project specification and recognised good practice for laps, jointing and movement detailing.

At a glance — Code 6 210mm 6m Roofing Lead