Why choose Code 6 914mm 6m Roofing Lead?

Code 6 914mm 6m Roofing Lead is a wide, heavy-duty roll for parapet/coping weatherings, compact bay roof panels,
chimney aprons/back gutters and other high-exposure details where stiffness, longevity and presentation matter. At roughly
2.65 mm thick and ~30.0 kg/m², Code 6 provides a robust covering that still dresses cleanly with the right
tools and technique. The 914 mm (≈36") width offers generous cover, while the 6 m length reduces joint count versus 3 m rolls,
improving aesthetics and speeding installation where safe handling is planned. For principle-led refreshers on bay sizing, movement control and sequencing,
explore the training content at The Lead Lads and our standards explainer:
BS 6915 — Proper Leadwork.

Best-fit uses for Code 6 914mm 6m Roofing Lead

• Parapet/coping weatherings and wide cappings where deeper laps and fewer joints are preferred.
• Compact bay roof panels (with sensible bay sizes, drips/rolls and a slip layer to manage movement).
• Chimney aprons, back gutters and saddles benefitting from added stiffness and broader coverage.
• Dormer tops/cheeks and larger upstands requiring robust weathering and a crisp finish.
• Refurbishment upgrades where stepping up from lighter codes improves longevity in exposed locations.

Planning & set-out

Before cutting Code 6 914mm 6m Roofing Lead, confirm exposure, laps, bay sizes and joint positions. Keep single-piece lengths sensible for the detail and site access;
while 6 m reduces joints, manual handling must be planned (team lift, edge protection, safe staging). Align joints with drips/outlets and maintain clear drainage paths.
For applied examples of quality leadwork and finished presentation, see
Neal Roofing — Leadwork.

Good practice with Code 6

Use mechanical fixings sparingly and outside movement zones; never bridge expansion joints. Under bay panels and wider weatherings, include a smooth
slip layer to facilitate free expansion/contraction and reduce underside abrasion. Detail
drips/rolls or expansion features appropriate to bay size and exposure. Finish visible elevations with
Patination Oil to minimise early staining while the natural patina develops. For chase restraint on adjacent flashings,
use Hall Clips prior to pointing with mortar or Lead Mate Sealant.

Installation essentials

1. Prepare the substrate: Smooth, continuous bearing; remove sharp edges. Add a slip layer beneath bays and wide coverings.
2. Set out & cut: Measure accurately and cut Code 6 914mm 6m Roofing Lead with clean edges for consistent laps and crisp arrises.
3. Restraint & fixings: Use copper or stainless fixings/clips; position out of movement zones and avoid over-nailing.
4. Edge/perimeter restraint: Where specified, use a Stainless Steel Fixing Strip and clips to manage wind uplift.
5. Finish & protect: Point chases neatly (mortar or Lead Mate) and apply patination oil on visible work.

Choosing the right code & width

Select Code 6 when the lead sheet acts as a covering (bays/parapets) or where detail depth and exposure exceed the comfort zone of lighter grades.
The 914 mm (≈36") width offers very generous coverage across parapets and compact bays; step down to 600–850 mm where geometry or handling dictates.
Matching code and width to function—plus thoughtful bay sizing, movement detailing and drainage—underpins long service life. Revisit method explainers aligned to recognised practice:
BS 6915 — Proper Leadwork.

Complete the system

Pair Code 6 914mm 6m Roofing Lead with:
Building Paper Lead Underlay (slip layer),
Copper ARS Nails 3.35×25 mm or
Stainless Ringshank 25 mm (compatible fixings),
Stainless Fixing Strip for perimeter restraint,
Hall Clips for chases, and
Patination Oil 0.5L to protect fresh work.

Further reading

For deeper dives into bay sizing, drips/rolls and movement control on parapets and compact bays, browse
theleadlads.co.uk and review site examples at
Neal Roofing — Leadwork.
These resources complement your project specification and help ensure Code 6 914mm 6m Roofing Lead performs exactly as intended.

At a glance — Code 6 914mm 6m Roofing Lead

Figures are indicative; always follow your project specification. Plan safe manual handling for heavier rolls and elevated work areas.